How To Reset Maintenance Light Toyota Corolla?

It’s easy to reset the maintenance light on your Toyota Corolla – just follow these simple steps!

1. Locate the maintenance light on the instrument panel.

2. Press and hold the reset button for 3 seconds.

3. Release the button and the light will reset itself. That’s all there is to it!

  • Park the Toyota Corolla in a level area and set the parking brake
  • Locate the maintenance light on the instrument panel
  • It is usually located near the odometer
  • Press and hold the reset button for about 5 seconds
  • The maintenance light should now be reset
How To Reset Maintenance Light Toyota Corolla?

2018 Toyota Corolla maintenance reset / oil light reset

How to reset maintenance light on toyota corolla 2005

If you own a Toyota Corolla from 2005 or later, you may be wondering how to reset the maintenance light.

The process is actually quite simple and can be done in just a few steps. First, locate the maintenance light on your dashboard.

It is a small, round light that is usually yellow or orange in color. Once you have found it, press and hold the reset button for about 5 seconds.

The light should then turn off, indicating that the reset is complete.

If your maintenance light does not reset after following these steps, you may need to take your car to a Toyota dealership or service center for further assistance.

Reset maintenance light — toyota corolla 2018

It’s important to keep up with the maintenance of your car. Part of that maintenance is resetting the maintenance light when it comes on.

Here’s how to do it on a Toyota Corolla from 2018:

First, find the maintenance light on your dashboard.

It’s likely a small light that says “MAINT” or something similar. Once you’ve found it, press and hold the odometer button on your dashboard.

While you’re holding it, turn the key to the “on” position without starting the engine. Keep holding the odometer button until the maintenance light comes on and then blinks three times.

After it blinks three times, release the button and your light should be reset!

Reset maintenance light toyota corolla 2016

If you’re like most people, you probably don’t think much about your car’s maintenance light.

But when it comes on, it’s important to take notice and take action. Here’s what you need to know about resetting the maintenance light on your Toyota Corolla.

First, it’s important to understand what the maintenance light is trying to tell you. The light is designed to come on when the car needs routine maintenance, such as an oil change or tire rotation.

It’s not an indicator of a serious problem, but it’s a good idea to take care of the maintenance as soon as possible.

If you’re not sure how to reset the maintenance light, don’t worry.

It’s easy to do and only takes a few minutes. Here’s what you need to do:

1. Turn off the car and open the hood.

2. Locate the maintenance light on the dashboard. It’s usually near the speedometer.

3. Press and hold the reset button for a few seconds. 4. Start the car and verify that the light is no longer on. That’s all there is to it!

Resetting the maintenance light is a simple process that anyone can do. Just be sure to take care of the routine maintenance items when the light comes on.

Reset maintenance light toyota corolla 2014

If you’re like most people, you probably don’t enjoy seeing that little “maintenance required” light on your dash.

But don’t worry, resetting it is actually quite simple. To reset the maintenance light on your Toyota Corolla from the 2014 model year, just follow these steps:

1. Start the engine and let it run for a few minutes.

2. Turn the engine off.

3. Press and hold the “trip” button on the instrument panel.

4. While holding the “trip” button, turn the key to the “on” position (without starting the engine).

5. Keep holding the “trip” button until the maintenance light starts flashing.

6. Release the “trip” button and you’re all set!

Now you can go about your business without that pesky light reminding you of upcoming maintenance.

How do you reset the maintenance light on a 2007 Toyota Corolla?

Assuming you would like a step-by-step guide on resetting the maintenance light on your 2007 Toyota Corolla:

1. Park your Corolla and set the parking brake.

2. Insert your key into the ignition.

3. Turn the key to the “On” position without starting the engine.

4. Press and release the odometer reset button, which is located to the left of the steering wheel.

5. Turn the key to the “Off” position and remove it from the ignition.

6. Reinsert the key and turn it to the “On” position without starting the engine.

7. Press and hold the odometer reset button.

8. Turn the key to the “Start” position and release the odometer reset button.

9. The maintenance light should now be reset.

How do you reset the maintenance light on a 2010 Toyota Corolla?

Assuming you would like a blog post discussing how to reset the maintenance light on a 2010 Toyota Corolla:

“How to Reset the Maintenance Light on a 2010 Toyota Corolla It’s important to keep up with the maintenance on your car to ensure it runs smoothly and efficiently.

Part of that maintenance is keeping track of when your car is due for an oil change. The maintenance light on your 2010 Toyota Corolla will come on when it’s time for an oil change.

You can reset the maintenance light after you’ve changed the oil yourself or had it done at a service center.

Resetting the Maintenance Light on Your 2010 Toyota Corolla-

1. Turn the key to the “On” position without starting the engine.

2. Press and release the gas pedal three times within five seconds.

3. Turn the key to the “Off” position.

4. Start the engine to verify the light has reset. That’s all there is to it!

Now you know how to reset the maintenance light on your 2010 Toyota Corolla.

Keep up the good work on maintaining your car and it will continue to serve you well for many miles to come.

How do you reset the maintenance required light on a 2013 Toyota Corolla?

The maintenance required light on a 2013 Toyota Corolla can be reset by holding down the odometer reset button while turning the ignition key to the ON position.

How do you reset the maintenance light on a Toyota Corolla 2021?

If you’re like most people, you probably don’t think much about your car’s maintenance light.

But when it comes on, it’s important to take notice and take action.

The maintenance light on a Toyota Corolla is designed to remind you when it’s time for scheduled maintenance.

This can include things like oil changes, tire rotations, and other routine services. If your maintenance light is on, it’s important to bring your car to a Toyota dealership or authorized service center for service.

Only trained Toyota technicians can properly reset the maintenance light.

If you try to reset the maintenance light yourself, you could end up doing more harm than good. So save yourself the hassle and leave it to the professionals.

Conclusion

If you’re looking to reset your maintenance light on your Toyota Corolla, there are a few different ways to do it.

One way is to simply disconnect your battery for a few minutes and then reconnect it. This should reset the light.

Another way is to use a code scanner to reset the light. You can usually find these at your local auto parts store.