# How to Determine Tongue Weight Without a Scale? (4 Methods)

Do you know how to assess tongue weight when you don’t have a scale?

The weight distribution of your trailer is crucial for safe towing, but what if you’re on the road and don’t have access to a scale?

In this blog post, we’ll explore practical methods to determine tongue weight without relying on a scale.

Discover simple techniques and handy tips to ensure a well-balanced load and a smoother towing experience.

## How to Determine Tongue Weight Without a Scale

### DIY Method 1: The Bathroom Scale Technique

First, you need to collect all the necessary materials. At this stage, you’ll need a bathroom scale, a piece of pipe that is the same height as your scale, a brick or a piece of wood, and a tape measure.

Now, it’s time to prepare your trailer. Park your trailer on a flat, level surface. Ensure that the trailer is level as well, with the tongue at the typical height for towing.

Remember, safety is key here, so double-check everything before moving on to the next step.

#### Set Up Your Bathroom Scale

Next, set up your bathroom scale. You’ll place this about a foot from the trailer tongue.

Then, on the opposite side of the trailer tongue, put the brick or piece of wood. The pipe goes on top of that.

You’ve created a kind of balance beam now, which will help you determine the tongue weight.

#### Measure the Tongue Weight

This is the moment you’ve been waiting for—measuring the tongue weight. Gently lower the trailer tongue onto the pipe.

The pipe will transfer some of the weight to the scale, which will give you a reading.

#### Calculate the Actual Tongue Weight

Finally, it’s time to calculate the actual tongue weight. To do this, you’ll multiply the scale reading by three (since the scale is approximately a third of the way from the tongue).

This figure will provide a reasonably accurate measure of your trailer’s tongue weight.

### DIY Method 2: The Vehicle Suspension Method

#### Prepare Your Vehicle and Trailer

Start by preparing your vehicle and trailer. Again, you need to park on a flat, level surface.

This time, you’re going to measure your vehicle’s wheel well height. Do this without the trailer attached, and then again with the trailer attached and loaded as if ready to tow.

#### Determine the Suspension Change

Next, determine the suspension change. To do this, you’ll subtract the first wheel well height measurement (without the trailer) from the second measurement (with the trailer).

The result is the change in your vehicle’s suspension due to the trailer’s tongue weight.

#### Find Your Vehicle’s Tongue Weight Capacity

Now, it’s time to find your vehicle’s tongue weight capacity. You’ll need to refer to your vehicle’s owner’s manual or manufacturer’s specifications for this information.

#### Calculate the Tongue Weight

Finally, calculate the tongue weight. Here’s the formula you’ll use: (Suspension change / Vehicle’s tongue weight capacity) x 100.

This will give you the tongue weight as a percentage of the total weight capacity. If the percentage is within your vehicle’s recommended range (usually 9-15%), you’re good to go!

Remember, these methods provide only an estimate. For a precise measurement, consider using a professional tongue weight scale or seeking assistance from a professional.

### DIY Method 3: Lever and Fulcrum Approach

Kick off this method by gathering the necessary tools. You’ll need a sturdy bar long enough to function as a lever (like a metal pipe), a fulcrum (a smaller solid object for the lever to pivot on), a hanging scale (like a luggage scale), and a rope or strong cord.

#### Set Up Your Lever System

The next step involves setting up your lever system. Position the fulcrum a known distance from where the tongue weight will be applied, and then place your lever (the metal pipe) on the fulcrum.

#### Attach the Trailer Tongue

Now, you need to attach the trailer tongue to the lever. Do this by connecting the rope or cord to the trailer tongue and then to the lever. Make sure the trailer is on level ground and properly supported.

#### Attach the Hanging Scale

With the lever system in place, attach the hanging scale at a known distance on the lever from the fulcrum.

#### Read the Weight and Calculate

Now that everything is set up, read the weight showing on the hanging scale. This won’t be the actual tongue weight yet, as you have to calculate that.

You can calculate the actual tongue weight by multiplying the weight on the scale by the ratio of the distance from the fulcrum to the scale, over the distance from the fulcrum to the trailer tongue.

### DIY Method 4: Using Common Household Objects for Estimation

This method, like the others, provides an estimate of the tongue weight. It might not be as precise as using a professional scale but can give you a good idea of whether your tongue weight is within an acceptable range.

For a more accurate measurement, consider using a professional scale or consulting a professional.

#### Gather the Required Objects

Begin this process by gathering objects around your home that have a known weight.

Ideally, these should be items that can safely be placed on your trailer tongue. Some common household items you might use include bags of rice, dumbbells, or jugs of water.

As with the other methods, you should park your trailer on a flat, level surface and ensure that the trailer itself is level.

The tongue should be at the usual height for towing.

#### Observe the Vehicle’s Reaction

If the rear of your towing vehicle begins to sag or if the front starts to lift, you’ve likely exceeded the recommended tongue weight.

#### Estimate the Tongue Weight

Through this process, you’re estimating the tongue weight based on the known weights of the household objects you’re using.

For instance, if your vehicle starts to sag after placing a 50-pound bag of rice on the trailer tongue, you know your tongue weight is around 50 pounds.

## Safety Precautions When Determining Tongue Weight at Home

### Work on Level Ground

When setting up to measure tongue weight, always ensure your trailer and vehicle are parked on a level, stable surface.

This is vital for accurate measurements and for preventing any accidental rolling or tipping of the trailer.

### Ensure Proper Support for the Trailer

When you’re disconnecting the trailer to measure tongue weight, it’s crucial to support it adequately.

Use wheel chocks to prevent the trailer from moving and a sturdy jack stand or equivalent to hold the trailer tongue.

### Be Cautious When Lifting

Whether you’re lifting household objects, a trailer tongue, or other heavy equipment, always use proper lifting techniques.

Bend at your knees, not your back, and avoid any twisting motions.

### Wear Appropriate Safety Gear

Depending on the method you’re using to measure tongue weight, it might be wise to wear safety gear. This could include gloves, safety glasses, or steel-toed boots.

### Keep Your Work Area Clear

Ensure your work area is free of any unnecessary items or potential tripping hazards. This includes children and pets.

Keeping your work area clean and clear helps prevent accidents.

Always follow the manufacturer’s guidelines found in the owner’s manual for your vehicle and trailer.

They provide important information about weight capacities, hitch setup, and other critical safety factors.

### Seek Professional Help When in Doubt

If you’re unsure about any part of the process, or if your measurements suggest that your tongue weight is outside the recommended range, it’s wise to seek professional help.

## The Relationship Between Tongue Weight and Trailer Stability

Tongue weight is a crucial factor in ensuring trailer stability and safe towing. It refers to the downward force exerted by the trailer coupler onto the hitch ball of the towing vehicle.

In general, the recommended tongue weight for any trailer is somewhere between 9% and 15% of the gross trailer weight (GTW).

This is the total weight of the trailer plus the cargo, fluids, and accessories on board.

This balance is important for several reasons:

### Vehicle Control

When you’re towing a trailer, the tongue weight helps to keep the trailer steady.

If the tongue weight is too low (less than the recommended percentage), it could lead to the trailer swaying back and forth because there isn’t enough downward force on the hitch.

This can lead to loss of control while driving, particularly at high speeds.

### Weight Distribution

If the tongue weight is too high (over the recommended percentage), it could cause the rear of the towing vehicle to sink, lifting the front wheels.

This can reduce the driver’s control over steering and braking because there is less weight on the front wheels of the towing vehicle.

### Trailer Handling

The proper tongue weight ensures that the trailer follows the towing vehicle’s path correctly.

Too much weight at the back end of the trailer could make the trailer difficult to handle.

### Brake Performance

Proper tongue weight can also affect the performance of the brakes. If there’s too much weight pushing down on the hitch, it can increase the stopping distance.

Various scales and devices can help with this, and many trailers have adjustable weight distribution to assist in achieving the proper balance.

## Maintaining Balance: Adjusting Tongue Weight for Optimal Towing

### Understand the Importance of Balance

Too much or too little tongue weight can make towing dangerous. The general rule of thumb is that the tongue weight should be about 10-15% of your total trailer weight.

Take a look at your current load. Where are the heaviest items located?

If your tongue weight is too high, move some weight from the front of the trailer toward the back. If your tongue weight is too low, do the opposite.

### Consider Weight Distribution Systems

If you’re regularly towing heavy loads and struggling to maintain proper balance, you might want to consider a weight distribution system.

These systems help spread the weight more evenly across the trailer and towing vehicle, making it easier to manage heavy loads.

### Regularly Recheck Your Tongue Weight

Finally, make it a habit to regularly recheck your tongue weight, especially if the load on your trailer changes often.

Even if you’re towing the same trailer with the same load, it’s still a good idea to recheck occasionally, as wear and tear on your equipment can lead to changes over time.

## FAQs

### How Often Should I Check The Tongue Weight Of My Trailer?

You should check the tongue weight every time the load in your trailer changes significantly.

Even if the load remains the same, it’s a good idea to recheck the tongue weight periodically to account for any changes in your equipment due to wear and tear.

### What Should I Do If The Tongue Weight Is Too High Or Too Low?

If the tongue weight is too high or too low, you should adjust the load in your trailer.

Move some weight from the front to the back if the tongue weight is too high, or from the back to the front if it’s too low.

Recheck the tongue weight after each adjustment until you reach the appropriate range.

### What’s The Ideal Tongue Weight For Safe Towing?

The ideal tongue weight is typically between 10% and 15% of your total trailer weight.

However, you should always check the specific recommendations for your vehicle and trailer, as they can vary.

## Final Words

The ability to determine tongue weight without a scale is an invaluable skill for anyone involved in towing.

Although it might seem daunting at first, with the practical methods we’ve shared in this guide, you’re now equipped to estimate tongue weight accurately and confidently.

Remember, the safety and efficiency of your towing depend heavily on this crucial factor.

So, practice these methods, understand your trailer’s weight distribution, and ensure you’re always within your vehicle’s towing capacity. So, get out there, and happy towing!